Front panel description
96 x 4 LED input meters
96 x Yellow ‘SOLO’ LED indicators
96 x Red ‘ARM / REC’ LED indicators
4 x ‘SELECT’ switches
8 x Pairs of AES50 status LED indicators
1 x Time display (8 x Blue 7 segment displays)
1 x ‘TIME’ display mode select switch
3 x Blue LED time display mode indicators
3 x Transport switches, ‘PLAY’, ‘STOP’ and ‘RECORD’
3 x Marker switches ‘SET’, ‘BACK’ and ‘FORWARD’
1 x ‘SOLO’ switch
1 x ‘SOLO’ encoder
1 x Headphone rotary level control
1 x Headphone output (1/4” jack)
1 x Footswitch input (1/4” jack)
4 x Pairs of Hard Drive status LED indicators (2 x internal, 2 x external)
2 x USB 2.0 (type ‘A’) connectors
1 x Klark Teknik Tufflex roundel with Blue LED illumination
1 x Recessed ‘POWER’ switch

Rear panel description
8 x AES50 Connectors - Neutrik Ethercons with status indication
1 x Linear Time Code Input - Neutrik B Series Female XLR
1 x DVI-I Output (or VGA Output with optional adapter)
1 x VGA Output
2 x Firewire 800 Connectors (Minimum)
2 x eSATA Connectors (Minimum)
All other ATX Motherboard connectors will vary depending on the Motherboard used, but will include 2 x PS2 or 2 x USB 2.0 connections for a keyboard and mouse (KVM)
2 x USB 2.0 For archiving
1 x Mains Switch (part of the ATX Power Supply)
1 x IEC Power inlet (part of the ATX Power Supply)

Power Requirements
Voltage 100V a.c. to 240V a.c. ±10%
Frequency 50Hz to 60Hz
Consumption <500W

Dimensions
Height 222 mm (8.7”), 5U high
Width 482 mm (19”)
Depth 505 mm (19.9”)

Weight
Net 20kg
Shipping 22kg

Back to DN9696